# SmallBars 75° - Boring Bars with EP 0502 Inserts

Source: https://www.denitool.com/en/smallbars-75.html
Curated Markdown for AI agents. Prices and availability: live via the Store API, see https://www.denitool.com/llms.txt

SmallBars 75° is the Denitool family of small stepped boring bars for internal turning (boring) of hard-to-reach parts. The line is built around the 75° rhombic insert EPGT 0502.. (size EP 0502, inch EP 1.81.5). The page says the small insert lets you reach back chamfers. There are two bar styles: **95° SELP** for bores from ⌀ 8 mm (.315") and **52.5° SEXP** for bores from ⌀ 9.5 mm (.374"). Each style comes in four shank sizes (⌀ 8, 10, 12, 16 mm, or ⌀ 5/16", 3/8", 1/2", 5/8" in the inch program), in right-hand and left-hand versions, and in three shank types (carbide with coolant channel, steel with coolant channel, steel without coolant channel). The cylindrical shanks have a flat (dimension H). The same insert also fits three square-shank external turning holders (SEXPN, SEAPR/L, SELPR/L).

Denitool is made by DENI AG (Veltheim, Switzerland) and its subsidiary Denitool Inc. (Raleigh NC, inch program).

![SmallBars 75° boring bars](https://www.denitool.com/assets/images/1/SmallBars-75-c5eb94d1.png)

## Key facts (page statements)

- Designed for hard-to-reach parts. With EPGT 0502.. inserts you can reach all back chamfers.
- The precision cut and carbide bar give very stable turning under all operating conditions.
- Easy chip control with EPGT 0502.. inserts. Cutting fast with coolant through the bar gives excellent surfaces (coolant channel only on E and A bars).

## Terms used on this page

- **KAPR**: tool cutting edge angle. 95° (SELP) turns and faces up to a shoulder. 52.5° (SEXP) has a pointed head profile.
- **DMIN**: minimum bore diameter the bar can enter.
- **CLMBD**: maximum boring depth at DMIN (length of the stepped neck).
- **DCON**: shank (connection) diameter.
- **LF**: functional length, from the shank end to the cutting corner.
- **OAL**: overall length. For SEXP bars the pointed head sticks out past the cutting corner, so OAL is longer than LF.
- **WF**: functional width, the distance from the shank axis to the cutting corner.
- **H**: shank height across the clamping flat.
- **Designation**, e.g. `E0608H SELPR-05`:
  - Shank material: **E** = carbide shank with coolant channel, **A** = steel shank with coolant channel, **S** = steel shank without coolant channel.
  - **06** = neck diameter code (6 mm), **08** = shank ⌀ 8 mm.
  - **H** = length code (H 100, J 110, K 125, M 150 mm).
  - **S** = screw clamping, **E** = 75° rhombic insert.
  - **L** = 95° or **X** = 52.5° style.
  - **P** = 11° insert clearance.
  - **R/L** = right or left hand.
  - **05** = insert size EP 0502.

  Inch bars carry the inch mark after the length letter, e.g. `E0605H" SELPR-05`. The shank digits count in sixteenths of an inch (05 = 5/16" = .312", 06 = 3/8", 08 = 1/2", 10 = 5/8"). The neck digits stay in mm. The shops write the inch mark as a right double quote (`E0605H” SELPR-05`). Full key: https://www.denitool.com/md/en/boring-bar-designation.md
- **Insert EPGT 050202 FR-10 DX20**:
  - E = 75° rhombus, P = 11° clearance, G = tolerance class, T = hole with countersink, one-sided chip breaker.
  - 05 = 5.6 mm cutting edge length, 02 = thickness 2.38 mm (.094"), 02 = corner radius 0.2 mm (04 = 0.4 mm).
  - EN / FR / FL / FR-10 / FL-10 = chip breaker geometry (N = neutral, R = right hand, L = left hand).
  - DX20 = grade.

  Full key: https://www.denitool.com/md/en/insert-designation.md

## 95° SELP stepped boring bars

| Property | Value |
|---|---|
| KAPR | 95° |
| Minimum bore | ⌀ 8 mm (.315") |
| Insert | EPGT 0502.. (EP 0502) |
| Insert screw | T22.045 (M2.2, Torx T7) |
| Torx driver | T7F (flag-type Torx T7 driver) |
| Tightening torque | 1.00 Nm (8.9 in-lb) |
| Shank tolerance | h6 (carbide shank), g7 (steel shank) |

The drawing shows the right-hand tool.

![SmallBars 75° SELP 95° dimension drawing (DMIN, CLMBD, DCON, LF, WF)](https://www.denitool.com/files/GTC/product_family_drawings/SB75ISELS.png)

### SELP, metric (mm)

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | H |
|---|---|---|---|---|---|---|---|
| E0608H SELPR-05 | E0608H SELPL-05 | 8 | 28 | 8 | 100 | 4.5 | 7 |
| E0810J SELPR-05 | E0810J SELPL-05 | 11 | 36 | 10 | 110 | 6 | 9 |
| E1012K SELPR-05 | E1012K SELPL-05 | 13 | 44 | 12 | 125 | 7 | 11 |
| E1216M SELPR-05 | E1216M SELPL-05 | 16 | 55 | 16 | 150 | 9 | 15 |
| A0608H SELPR-05 | A0608H SELPL-05 | 8 | 20 | 8 | 100 | 4.5 | 7 |
| A0810J SELPR-05 | A0810J SELPL-05 | 11 | 26 | 10 | 110 | 6 | 9 |
| A1012K SELPR-05 | A1012K SELPL-05 | 13 | 32 | 12 | 125 | 7 | 11 |
| A1216M SELPR-05 | A1216M SELPL-05 | 16 | 40 | 16 | 150 | 9 | 15 |
| S0608H SELPR-05 | S0608H SELPL-05 | 8 | 20 | 8 | 100 | 4.5 | 7 |
| S0810J SELPR-05 | S0810J SELPL-05 | 11 | 26 | 10 | 110 | 6 | 9 |
| S1012K SELPR-05 | S1012K SELPL-05 | 13 | 32 | 12 | 125 | 7 | 11 |
| S1216M SELPR-05 | S1216M SELPL-05 | 16 | 40 | 16 | 150 | 9 | 15 |

The carbide shank (E) gives a longer CLMBD than the steel shanks (A, S) of the same size.

### SELP, inch program (inch)

The inch bars have an inch shank. Their lengths, DMIN and WF are the same as the metric bars.

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | H |
|---|---|---|---|---|---|---|---|
| E0605H" SELPR-05 | E0605H" SELPL-05 | .315" | 1.102" | .312" | 3.940" | .177" | .273" |
| E0806J" SELPR-05 | E0806J" SELPL-05 | .433" | 1.417" | .375" | 4.330" | .236" | .336" |
| E1008K" SELPR-05 | E1008K" SELPL-05 | .512" | 1.732" | .500" | 4.921" | .276" | .461" |
| E1210M" SELPR-05 | E1210M" SELPL-05 | .630" | 2.165" | .625" | 5.906" | .354" | .586" |
| A0605H" SELPR-05 | A0605H" SELPL-05 | .315" | .787" | .312" | 3.940" | .177" | .273" |
| A0806J" SELPR-05 | A0806J" SELPL-05 | .433" | 1.024" | .375" | 4.330" | .236" | .336" |
| A1008K" SELPR-05 | A1008K" SELPL-05 | .512" | 1.260" | .500" | 4.921" | .276" | .461" |
| A1210M" SELPR-05 | A1210M" SELPL-05 | .630" | 1.575" | .625" | 5.906" | .354" | .586" |
| S0605H" SELPR-05 | S0605H" SELPL-05 | .315" | .787" | .312" | 3.940" | .177" | .273" |
| S0806J" SELPR-05 | S0806J" SELPL-05 | .433" | 1.024" | .375" | 4.330" | .236" | .336" |
| S1008K" SELPR-05 | S1008K" SELPL-05 | .512" | 1.260" | .500" | 4.921" | .276" | .461" |
| S1210M" SELPR-05 | S1210M" SELPL-05 | .630" | 1.575" | .625" | 5.906" | .354" | .586" |

## 52.5° SEXP stepped boring bars

| Property | Value |
|---|---|
| KAPR | 52.5° (lead angle 37.5°) |
| Minimum bore | ⌀ 9.5 mm (.374") for size 0608 / 0605", otherwise as SELP |
| Insert | EPGT 0502.. (EP 0502) |
| Insert screw | T22.045 (M2.2, Torx T7) |
| Torx driver | T7F |
| Tightening torque | 1.00 Nm (8.9 in-lb) |
| Shank tolerance | h6 (carbide shank), g7 (steel shank) |

The drawing shows the right-hand tool.

![SmallBars 75° SEXP 52.5° dimension drawing (DMIN, CLMBD, DCON, LF, WF)](https://www.denitool.com/files/GTC/product_family_drawings/SB75ISEXS.png)

### SEXP, metric (mm)

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | OAL | WF | H |
|---|---|---|---|---|---|---|---|---|
| E0608H SEXPR-05 | E0608H SEXPL-05 | 9.5 | 28 | 8 | 100 | 102.85 | 5.5 | 7 |
| E0810J SEXPR-05 | E0810J SEXPL-05 | 11 | 36 | 10 | 110 | 112.8 | 6 | 9 |
| E1012K SEXPR-05 | E1012K SEXPL-05 | 13 | 44 | 12 | 125 | 127.8 | 7 | 11 |
| E1216M SEXPR-05 | E1216M SEXPL-05 | 16 | 55 | 16 | 150 | 153 | 9 | 15 |
| A0608H SEXPR-05 | A0608H SEXPL-05 | 9.5 | 20 | 8 | 100 | 102.85 | 5.5 | 7 |
| A0810J SEXPR-05 | A0810J SEXPL-05 | 11 | 26 | 10 | 110 | 112.8 | 6 | 9 |
| A1012K SEXPR-05 | A1012K SEXPL-05 | 13 | 32 | 12 | 125 | 127.8 | 7 | 11 |
| A1216M SEXPR-05 | A1216M SEXPL-05 | 16 | 40 | 16 | 150 | 153 | 9 | 15 |
| S0608H SEXPR-05 | S0608H SEXPL-05 | 9.5 | 20 | 8 | 100 | 102.85 | 5.5 | 7 |
| S0810J SEXPR-05 | S0810J SEXPL-05 | 11 | 26 | 10 | 110 | 112.8 | 6 | 9 |
| S1012K SEXPR-05 | S1012K SEXPL-05 | 13 | 32 | 12 | 125 | 127.8 | 7 | 11 |
| S1216M SEXPR-05 | S1216M SEXPL-05 | 16 | 40 | 16 | 150 | 153 | 9 | 15 |

### SEXP, inch program (inch)

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | H |
|---|---|---|---|---|---|---|---|
| E0605H" SEXPR-05 | E0605H" SEXPL-05 | .374" | 1.102" | .312" | 3.937" | .216" | .273" |
| E0806J" SEXPR-05 | E0806J" SEXPL-05 | .433" | 1.417" | .375" | 4.330" | .236" | .336" |
| E1008K" SEXPR-05 | E1008K" SEXPL-05 | .512" | 1.732" | .500" | 4.921" | .276" | .461" |
| E1210M" SEXPR-05 | E1210M" SEXPL-05 | .630" | 2.165" | .625" | 5.906" | .354" | .586" |
| A0605H" SEXPR-05 | A0605H" SEXPL-05 | .374" | .787" | .312" | 3.937" | .216" | .273" |
| A0806J" SEXPR-05 | A0806J" SEXPL-05 | .433" | 1.024" | .375" | 4.330" | .236" | .336" |
| A1008K" SEXPR-05 | A1008K" SEXPL-05 | .512" | 1.260" | .500" | 4.921" | .276" | .461" |
| A1210M" SEXPR-05 | A1210M" SEXPL-05 | .630" | 1.575" | .625" | 5.906" | .354" | .586" |
| S0605H" SEXPR-05 | S0605H" SEXPL-05 | .374" | .787" | .312" | 3.937" | .216" | .273" |
| S0806J" SEXPR-05 | S0806J" SEXPL-05 | .433" | 1.024" | .375" | 4.330" | .236" | .336" |
| S1008K" SEXPR-05 | S1008K" SEXPL-05 | .512" | 1.260" | .500" | 4.921" | .276" | .461" |
| S1210M" SEXPR-05 | S1210M" SEXPL-05 | .630" | 1.575" | .625" | 5.906" | .354" | .586" |

## External square-shank tool holders for EP 0502

These holders take the same EPGT 0502.. inserts. Their insert screw is **T22.050** (M2.2, Torx T7, 1.00 Nm / 8.9 in-lb), not the T22.045 used in the boring bars. The driver is T7F.

Terms: H = shank height, B = shank width, L = overall length, E = head length, F = distance from the shank's reference side to the cutting corner.

| Style | KAPR | Hand | Designations (metric) | H × B × L (mm) | E (mm) | F (mm) |
|---|---|---|---|---|---|---|
| SEXPN | 52.5° | neutral | SEXPN 0808 K05 | 8 × 8 × 125 | 12 | 4 |
| SEXPN | 52.5° | neutral | SEXPN 1010 M05 | 10 × 10 × 150 | 12 | 5 |
| SEXPN | 52.5° | neutral | SEXPN 1212 M05 | 12 × 12 × 150 | 12 | 6 |
| SEAP | 90° | right / left | SEAPR 0808 K05 / SEAPL 0808 K05 | 8 × 8 × 125 | 10 | 8.5 |
| SEAP | 90° | right / left | SEAPR 1010 M05 / SEAPL 1010 M05 | 10 × 10 × 150 | 10 | 10.5 |
| SEAP | 90° | right / left | SEAPR 1212 M05 / SEAPL 1212 M05 | 12 × 12 × 150 | 12 | 12.5 |
| SELP | 97.5° | right / left | SELPR 0808 D05 / SELPL 0808 D05 | 8 × 8 × 60 | 10 | 10 |
| SELP | 97.5° | right / left | SELPR 1010 E05 / SELPL 1010 E05 | 10 × 10 × 70 | 10 | 12 |
| SELP | 97.5° | right / left | SELPR 1212 F05 / SELPL 1212 F05 | 12 × 12 × 80 | 12 | 16 |

Inch holders have a square shank of .312" (5/16"), .375" (3/8") or .500" (1/2"). Their lengths are the same as the metric holders.

| Style | Designations (inch) | H × B × L |
|---|---|---|
| SEXPN | SEXPN "0505 K05, SEXPN "0606 M05, SEXPN "0808 M05 | .312" × .312" × 4.921" / .375" × .375" × 5.906" / .500" × .500" × 5.906" |
| SEAP | SEAPR/SEAPL "0505 K05, "0606 M05, "0808 M05 | .312" × .312" × 4.921" / .375" × .375" × 5.906" / .500" × .500" × 5.906" |
| SELP | SELPR/SELPL "0505 D05, "0606 E05, "0808 F05 | .312" × .312" × 2.362" / .375" × .375" × 2.756" / .500" × .500" × 3.150" |

The CH shop lists the inch holders with a right double quote (e.g. `SELPR ”0505 D05`), the US shop with a left double quote (`SELPR “0505 D05`).

## Inserts EPGT 0502..

All inserts have a 75° rhombic shape, 11° clearance and a 12° rake angle. Cutting edge length l = 5.6 mm (.220"), inscribed circle d = 5.56 mm (.219"), thickness s = 2.38 mm (.094"), hole ⌀ d1 = 2.5 mm (.098"). The corner dimension m is 1.658 mm (.0653") at r 0.2 mm and 1.530 mm (.0602") at r 0.4 mm.

| Insert | Corner radius r | Hand | Grades in the shops |
|---|---|---|---|
| EPGT 050202 EN | 0.2 mm (.008") | neutral | DX2, DX20, DX30, DX50, DX52, DT55, DT255, DT355 |
| EPGT 050204 EN | 0.4 mm (.016") | neutral | DX2, DX20, DX30, DX50, DX52, DT55, DT255, DT355 |
| EPGT 050202 FR / FL | 0.2 mm | right / left | DT55, DT255, DT355 |
| EPGT 050204 FR / FL | 0.4 mm | right / left | DT55, DT255, DT355 |
| EPGT 050202 FR-10 / FL-10 | 0.2 mm | right / left | DX2, DX20, DX30, DX50 |
| EPGT 050204 FR-10 / FL-10 | 0.4 mm | right / left | DX2, DX20, DX30, DX50 |

The full article name is the designation plus the grade, e.g. `EPGT 050204 FR-10 DX30`. The FR-10/FL-10 inserts have a wider tolerance on d (±0.05 mm) and on m (±0.08 mm) than EN and FR/FL (±0.025 mm).

Grades:
- DX2: uncoated carbide.
- DX20, DX30, DX50: PVD-coated carbide.
- DX52: PVD-coated carbide with a PLC anti-friction film.
- DT55: uncoated cermet.
- DT255, DT355: PVD-coated cermet.

Grade details: https://www.denitool.com/md/en/insert-grades.md. Insert overview page: https://www.denitool.com/en/indexable-inserts/i/ep-0502-ep-1-81-5.html

## Cutting data (Denitool Data sheet "SmallBars 75°", metric)

Start values from the public cutting data sheet linked on the page (Deni AG 09/2014). f is the feed in mm/rev, and it depends on the stability of the tool and the workpiece. vc is in m/min. The three values per cell are low / medium / high feed, and each vc belongs to the feed on the same line. "-" means no value is given.

- Feed columns: **f EN** = EPGT EN inserts, **f FR/FL** = EPGT FR/FL inserts, **f FR/FL-10** = EPGT FR/FL-10 inserts.
- Cutting speed columns by grade: **DX2** (uncoated carbide), **DX20**, **DX30/50/52** (coated carbide), **DT55** (uncoated cermet), **DT255**, **DT355** (coated cermet).

| No. | Material group | Rm (N/mm²) | HB | f EN | f FR/FL | f FR/FL-10 | vc DX2 | vc DX20 | vc DX30/50/52 | vc DT55 | vc DT255 | vc DT355 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Low carbon steel (1.0035, 1.0038, 1.0401, 1.0050) | up to 500 | up to 160 | 0.05 / 0.15 / 0.25 | 0.03 / 0.07 / 0.14 | 0.03 / 0.07 / 0.14 | 150 / 130 / 90 | 340 / 290 / 240 | 380 / 320 / 260 | 460 / 370 / 250 | 580 / 470 / 320 | 580 / 470 / 320 |
| 2 | Alloy steel (1.0501, 1.1141, 1.5732, 1.7225) | 500 - 700 | 140 - 200 | 0.05 / 0.15 / 0.25 | 0.03 / 0.07 | 0.03 / 0.07 | 120 / 90 / 60 | 320 / 270 / 220 | 360 / 300 / 280 | 440 / 350 / 220 | 550 / 440 / 280 | 550 / 440 / 280 |
| 3 | Tool steel (1.1221, 1.3505, 1.7225, 1.5141) | 900 - 1'100 | 170 - 275 | 0.05 / 0.15 / 0.20 | 0.03 / 0.07 | 0.03 / 0.07 | 90 / 70 / 50 | 260 / 210 / 170 | 320 / 290 / 200 | 410 / 340 / 230 | 510 / 420 / 290 | 510 / 420 / 290 |
| 4 | Alloy tool steel (1.1191, 1.7225, 1.2080, 1.7220) | 700 - 900 | 250 - 325 | 0.05 / 0.15 / 0.20 | 0.03 / 0.07 | 0.03 / 0.07 | 60 / 50 / 40 | 200 / 180 / 120 | 260 / 220 / 160 | 220 / 200 / 140 | 270 / 240 / 170 | 270 / 240 / 170 |
| 5 | Alloy cast steel (1.6582, 1.8159, 1.2367, 1.7361) | 800 - 1'500 | 250 - 450 | 0.05 / 0.15 / 0.20 | 0.03 / 0.05 | 0.03 / 0.05 | - | 140 / 120 / 90 | 200 / 160 / 120 | 180 / 150 / 120 | 220 / 190 / 150 | 220 / 190 / 150 |
| 6 | Stainless steel (1.4006, 1.4057, 1.4034, 1.4005) | up to 800 | up to 250 | 0.05 / 0.15 | - | 0.03 / 0.07 | - | 160 / 140 | 170 / 160 | - | - | - |
| 7 | Stainless steel, austenitic, martensitic (1.4300, 1.4301, 1.4435, 1.4573) | 500 - 1'100 | 200 - 325 | 0.02 / 0.15 | - | 0.02 / 0.07 | - | 120 / 100 | 130 / 110 | - | - | - |
| 8 | Grey cast iron (0.6010, 0.6015, 0.6020) | up to 250 | up to 200 | 0.05 / 0.15 / 0.20 | - | - | 140 / 120 / 100 | 260 / 220 / 200 | 280 / 250 / 230 | 180 / 160 / 130 | 340 / 280 / 240 | 360 / 320 / 300 |
| 9 | Cast iron, malleable (0.6025, 0.8135, 0.8140, 0.7050) | 250 - 350 | 200 - 250 | 0.05 / 0.15 / 0.20 | - | - | 120 / 90 / 70 | 220 / 200 / 180 | 250 / 220 / 200 | 160 / 120 / 90 | 280 / 260 / 240 | 320 / 280 / 260 |
| 10 | Copper alloys (2.0331, 2.0401, 2.1030, 2.0920) | 450 - 650 | 120 - 180 | 0.02 / 0.15 / 0.20 | - | 0.02 / 0.15 / 0.25 | 450 / 400 / 350 | 550 / 500 / 450 | 600 / 550 / 500 | - | - | - |
| 11 | Aluminium alloys (3.2582.05, 3.3541.01, 3.2315, 3.0205) | 250 - 350 | 200 - 300 | - | - | 0.02 / 0.15 / 0.25 | - | > 1'900 | > 2'000 | - | - | - |

For group 5, the sheet gives Rm 1'100 - 1'500 with HB 325 - 450, and Rm 800 - 1'000 with HB 250 - 390. The sheet warns that the general safety regulations and the directions of the machine manufacturer must always be followed.

Source sheets: the metric data sheet is at https://drive.google.com/file/d/0B0FVd0DDs6fFckhnSHotdDRZbHM/preview and the U.S. data sheet (sfm, ipr) is at https://drive.google.com/file/d/0B0FVd0DDs6fFXzVISi0ta2pzS0k/preview. Catalog pages: metric at https://drive.google.com/file/d/0B0FVd0DDs6fFeWVSNFh4c2FoaUU/preview, inch at https://drive.google.com/file/d/0B0FVd0DDs6fFUEhrRm9zc3JSUm8/preview.

## Find and order (Store API)

- 95° boring bars (metric and inch, right and left hand): `https://ch.denitool.com/wp-json/wc/store/v1/products?search=SELPR-05` (right hand, 24 bars, metric and inch). Use `search=SELPL-05` for left hand.
- 52.5° boring bars: `https://ch.denitool.com/wp-json/wc/store/v1/products?search=SEXPR-05`. Use `search=SEXPL-05` for left hand.
- A single bar: `https://ch.denitool.com/wp-json/wc/store/v1/products?search=E0608H%20SELPR-05`
- External holders: `search=SEXPN`, `search=SEAPR`, `search=SEAPL`
- Inserts: `https://ch.denitool.com/wp-json/wc/store/v1/products?search=EPGT` (all 44 EPGT 0502.. articles). For one geometry, use for example `search=EPGT%20050204%20FR-10`.
- Screws and driver: `search=T22.045`, `search=T22.050`, `search=T7F`
- Inch program (Denitool Inc.): run the same queries on `https://store.denitool.com/wp-json/wc/store/v1/products?search=SEXPR-05`. Not every article is listed in both shops.

## Related pages

- Products overview: https://www.denitool.com/md/en/products.md
- Turning overview: https://www.denitool.com/md/en/turning.md
- Boring bar designation key: https://www.denitool.com/md/en/boring-bar-designation.md
- Insert designation key: https://www.denitool.com/md/en/insert-designation.md
- Insert grades: https://www.denitool.com/md/en/insert-grades.md
- Tightening torques for insert screws: https://www.denitool.com/md/en/tightening-torque.md
- Other small boring bar families:
  - MiniTools 80°: https://www.denitool.com/md/en/minitools-80.md
  - HardTurn 80°: https://www.denitool.com/md/en/hardturn-80.md
  - Turning 60°: https://www.denitool.com/md/en/turning-60.md
  - SynTool: https://www.denitool.com/md/en/syntool.md
- Small-bore tools:
  - MicroTurn A-S: https://www.denitool.com/md/en/microturn-a-s.md
  - MicroTurn D: https://www.denitool.com/md/en/microturn-d.md
  - MicroCopy D: https://www.denitool.com/md/en/microcopy-d.md
  - MicroCopy G: https://www.denitool.com/md/en/microcopy-g.md
  - MicroCopy 35: https://www.denitool.com/md/en/microcopy-35.md
  - MiniCopy 35: https://www.denitool.com/md/en/minicopy-35.md
  - Copy 35: https://www.denitool.com/md/en/copy-35.md
- Swiss-type machines: https://www.denitool.com/md/en/swissline.md
- Holders and tooling systems:
  - Tooling systems: https://www.denitool.com/md/en/tooling-systems.md
  - Vario System: https://www.denitool.com/md/en/vario-system.md
  - Modulo D System: https://www.denitool.com/md/en/modulo-d-system.md
- ISO tools: https://www.denitool.com/md/en/isotools.md
- Cut-off inserts code: https://www.denitool.com/md/en/cut-off-inserts-code.md
- Services, support and downloads:
  - Services: https://www.denitool.com/md/en/services.md
  - Support: https://www.denitool.com/md/en/support.md
  - Downloads: https://www.denitool.com/md/en/downloads.md
  - Company: https://www.denitool.com/md/en/denitool-company.md