# MicroTurn D: Boring Bars from ⌀ 4.8 mm (.189")

Source: https://www.denitool.com/en/microturn-d.html
Curated Markdown for AI agents. Prices and availability: live via the Store API, see https://www.denitool.com/llms.txt

MicroTurn D is Denitool's range of small boring bars with indexable inserts for internal turning (boring) of small holes. Denitool is DENI AG, Veltheim, Switzerland, with its North American headquarters Denitool Inc., Raleigh NC, which publishes the inch catalog. All bars use the 95° SCLD style and one insert size, the 80° rhombic insert CD 0401 (CDGT 0401.. and CDGW 0401..). Minimum bore diameter DMIN is 4.8 mm, 5.8 mm or 6.8 mm (.189", .228", .268"), depending on the bar. Maximum boring depth is 16 to 36 mm (.630" to 1.417").

The range has 54 bars:

- 18 cylindrical bars with 4, 5 or 6 mm shanks. Each comes in steel, steel with internal coolant or carbide with internal coolant, and in right-hand or left-hand.
- 18 stepped bars with an 8 mm shank and a 4, 5 or 6 mm neck, in the same versions.
- 18 inch stepped bars with a 5/16" shank, in the same versions.

For solid (monobloc) micro tools that work in bores from ⌀ 2.8 mm (.110"), see MicroTurn A/S: https://www.denitool.com/md/en/microturn-a-s.md

![MicroTurn D micro boring bars](https://www.denitool.com/assets/images/d/MicroTurn-D-48a282cd.png)

What the page says about the range:
- Economical boring of holes from ⌀ 4.8 mm (.189"), using precision inserts and precision holders.
- The fine cut keeps turning very stable under different operating conditions.
- CDGT 0401.. inserts make chip control easy. In small bores, success depends on producing very small chips.

## Common data for all MicroTurn D bars

| Item | Value |
| --- | --- |
| Tool style | SCLD (screw clamping S, 80° rhombic insert C, KAPR 95° L, 15° insert clearance D) |
| KAPR (tool cutting edge angle) | 95° |
| Insert size | CD 0401 (CDGT 0401.., CDGW 0401..), insert page: https://www.denitool.com/en/indexable-inserts/i/cd-0401-cd-1-2-6.html |
| Insert screw | T18.Z30A (thread about M1.8) |
| Torx driver | T5F (Torx size T5) |
| Tightening torque of the screw | 0.45 Nm |
| Insert hand | **Right-hand bars (…SCLDR-04) take left-hand inserts (FL). Left-hand bars (…SCLDL-04) take right-hand inserts (FR).** Neutral FN inserts fit both hands. |
| Tool drawings | The drawings show the right-hand tool. |

## Designation and abbreviations

Example: **E0408H SCLDR-04**. The full key is at https://www.denitool.com/md/en/boring-bar-designation.md

| Part | Meaning |
| --- | --- |
| First letter | S = steel shank, no coolant hole. A = steel shank with internal coolant. E = carbide shank with internal coolant. |
| 04 / 05 / 06 | Shank diameter in mm on cylindrical bars |
| 0408 / 0508 / 0608 | Stepped bar: nominal neck diameter 4/5/6 mm, then shank diameter 8 mm (the catalog lists a 4.2 mm neck on S0408H and A0408H) |
| 0405" / 0505" / 0605" | Inch stepped bar: nominal neck diameter 4/5/6 mm (catalog: .165" on S0405H" and A0405H"), then shank diameter 5/16" (0.313", 7.94 mm). The shank digits count sixteenths of an inch. |
| E / F / G / H | Length letter. The nominal functional length is E 70 mm, F 80 mm, G 95 mm, H 100 mm. E05F is an exception at 85 mm, see the table. |
| S C L D | Screw clamping, C insert (80° rhombus), L tool style (KAPR 95°), D (15° insert clearance) |
| R / L | Right-hand or left-hand tool |
| -04 | Insert size 04 (CD 0401..) |

| Abbreviation | Meaning |
| --- | --- |
| DMIN | Minimum bore diameter the bar can enter |
| CLMBD | Maximum boring depth at DMIN. On stepped bars this is also the neck length. |
| DCON | Shank (connection) diameter |
| LF | Functional length. On MicroTurn D bars it equals the overall length. |
| WF | Functional width: the distance from the shank axis to the cutting corner |
| γ | Rake angle of the insert seat: 5.5° (DMIN 4.8), 4° (DMIN 5.8), 3° (DMIN 6.8) |
| h | Width across the two parallel clamping flats on stepped bars: 7 mm (0.273" on the inch 5/16" bars) |
| KAPR | Tool cutting edge angle, measured from the feed direction |

Carbide shanks damp vibration much better than hardened steel shanks, which gives better surface quality and longer tool life. The E bars reach 24/30/36 mm boring depth (6× the 4/5/6 mm shank or neck diameter), the steel bars 16/20/24 mm (4×). The coolant channel of the A and E bars is aimed directly at the insert. Shank tolerance is h6 on carbide shanks and g7 on steel shanks.

## 95° SCLD cylindrical boring bars (round shank ⌀ 4, 5, 6 mm)

![Tool drawing, MicroTurn D cylindrical boring bar SCLD, right-hand](https://www.denitool.com/files/GTC/product_family_drawings/MTDISCLD.png)

The drawing shows the dimension names DMIN, CLMBD, DCON, LF and WF on a right-hand cylindrical bar.

Values are in mm, with inches in brackets. Each row lists the right-hand and the left-hand bar, which have identical dimensions.

### Carbide shank, with coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| E04F SCLDR-04 | E04F SCLDL-04 | 4.8 (.189") | 24 (.945") | 4 (.157") | 80 (3.150") | 2.5 (.098") | 5.5° |
| E05F SCLDR-04 | E05F SCLDL-04 | 5.8 (.228") | 30 (1.181") | 5 (.197") | 85 (3.346") | 2.9 (.114") | 4° |
| E06G SCLDR-04 | E06G SCLDL-04 | 6.8 (.268") | 36 (1.417") | 6 (.236") | 95 (3.740") | 3.4 (.134") | 3° |

### Steel shank, with coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| A04E SCLDR-04 | A04E SCLDL-04 | 4.8 (.189") | 16 (.630") | 4 (.157") | 70 (2.756") | 2.5 (.098") | 5.5° |
| A05E SCLDR-04 | A05E SCLDL-04 | 5.8 (.228") | 20 (.787") | 5 (.197") | 70 (2.756") | 2.9 (.114") | 4° |
| A06F SCLDR-04 | A06F SCLDL-04 | 6.8 (.268") | 24 (.945") | 6 (.236") | 80 (3.150") | 3.4 (.134") | 3° |

### Steel shank, without coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| S04E SCLDR-04 | S04E SCLDL-04 | 4.8 (.189") | 16 (.630") | 4 (.157") | 70 (2.756") | 2.5 (.098") | 5.5° |
| S05E SCLDR-04 | S05E SCLDL-04 | 5.8 (.228") | 20 (.787") | 5 (.197") | 70 (2.756") | 2.9 (.114") | 4° |
| S06F SCLDR-04 | S06F SCLDL-04 | 6.8 (.268") | 24 (.945") | 6 (.236") | 80 (3.150") | 3.4 (.134") | 3° |

The cylindrical bars have a plain round shank with no clamping flat. To hold them in 10, 16 or 20 mm bores (or 3/8", 5/8" or 3/4" bores), use the reduction bushings listed below.

## 95° SCLD stepped boring bars, metric shank ⌀ 8 mm

![Tool drawing, MicroTurn D stepped boring bar SCLD, right-hand](https://www.denitool.com/files/GTC/product_family_drawings/MTDISCLDS.png)

The drawing shows a right-hand stepped bar with a reduced neck and an 8 mm shank that has two parallel clamping flats (h = 7 mm). Values are in mm, with inches in brackets. The neck diameter is 4, 5 or 6 mm, as coded in the designation. Exception: the catalog lists 4.2 mm for the steel bars S0408H and A0408H. The neck length equals CLMBD.

### Carbide shank, with coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| E0408H SCLDR-04 | E0408H SCLDL-04 | 4.8 (.189") | 24 (.945") | 8 (.315") | 100 (3.937") | 2.5 (.098") | 5.5° |
| E0508H SCLDR-04 | E0508H SCLDL-04 | 5.8 (.228") | 30 (1.181") | 8 (.315") | 100 (3.937") | 2.9 (.114") | 4° |
| E0608H SCLDR-04 | E0608H SCLDL-04 | 6.8 (.268") | 36 (1.417") | 8 (.315") | 100 (3.937") | 3.4 (.134") | 3° |

### Steel shank, with coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| A0408H SCLDR-04 | A0408H SCLDL-04 | 4.8 (.189") | 16 (.630") | 8 (.315") | 100 (3.937") | 2.5 (.098") | 5.5° |
| A0508H SCLDR-04 | A0508H SCLDL-04 | 5.8 (.228") | 20 (.787") | 8 (.315") | 100 (3.937") | 2.9 (.114") | 4° |
| A0608H SCLDR-04 | A0608H SCLDL-04 | 6.8 (.268") | 24 (.945") | 8 (.315") | 100 (3.937") | 3.4 (.134") | 3° |

### Steel shank, without coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| S0408H SCLDR-04 | S0408H SCLDL-04 | 4.8 (.189") | 16 (.630") | 8 (.315") | 100 (3.937") | 2.5 (.098") | 5.5° |
| S0508H SCLDR-04 | S0508H SCLDL-04 | 5.8 (.228") | 20 (.787") | 8 (.315") | 100 (3.937") | 2.9 (.114") | 4° |
| S0608H SCLDR-04 | S0608H SCLDL-04 | 6.8 (.268") | 24 (.945") | 8 (.315") | 100 (3.937") | 3.4 (.134") | 3° |

## 95° SCLD stepped boring bars, inch shank ⌀ 5/16" (Denitool Inc. program)

These bars have the same heads, necks and lengths as the metric stepped bars, but a 5/16" shank (0.313", 7.94 mm) with two parallel clamping flats, h = 0.273" (6.94 mm). The inch sign is part of the designation, e.g. `E0405H" SCLDR-04`. Values are in inches, with mm in brackets.

### Carbide shank, with coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| E0405H" SCLDR-04 | E0405H" SCLDL-04 | .189" (4.8) | .945" (24) | .313" (7.94) | 3.937" (100) | .098" (2.5) | 5.5° |
| E0505H" SCLDR-04 | E0505H" SCLDL-04 | .228" (5.8) | 1.181" (30) | .313" (7.94) | 3.937" (100) | .114" (2.9) | 4° |
| E0605H" SCLDR-04 | E0605H" SCLDL-04 | .268" (6.8) | 1.417" (36) | .313" (7.94) | 3.937" (100) | .134" (3.4) | 3° |

### Steel shank, with coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| A0405H" SCLDR-04 | A0405H" SCLDL-04 | .189" (4.8) | .630" (16) | .313" (7.94) | 3.937" (100) | .098" (2.5) | 5.5° |
| A0505H" SCLDR-04 | A0505H" SCLDL-04 | .228" (5.8) | .787" (20) | .313" (7.94) | 3.937" (100) | .114" (2.9) | 4° |
| A0605H" SCLDR-04 | A0605H" SCLDL-04 | .268" (6.8) | .945" (24) | .313" (7.94) | 3.937" (100) | .134" (3.4) | 3° |

### Steel shank, without coolant channel

| Right hand | Left hand | DMIN | CLMBD | DCON | LF | WF | γ |
| --- | --- | --- | --- | --- | --- | --- | --- |
| S0405H" SCLDR-04 | S0405H" SCLDL-04 | .189" (4.8) | .630" (16) | .313" (7.94) | 3.937" (100) | .098" (2.5) | 5.5° |
| S0505H" SCLDR-04 | S0505H" SCLDL-04 | .228" (5.8) | .787" (20) | .313" (7.94) | 3.937" (100) | .114" (2.9) | 4° |
| S0605H" SCLDR-04 | S0605H" SCLDL-04 | .268" (6.8) | .945" (24) | .313" (7.94) | 3.937" (100) | .134" (3.4) | 3° |

## Inserts: CD 0401 (80° rhombic, 15° clearance)

Every MicroTurn D bar uses the same insert size. The insert designation key is at https://www.denitool.com/md/en/insert-designation.md

| Designation | Chip breaker / edge | Rake angle | Corner radius R (mm) | Grades in the catalog |
| --- | --- | --- | --- | --- |
| CDGT 040100 FR/FL | F = sharp edge, R/L = right/left-hand | 12° | 0.0 | DX2, DX20, DX30, DX50 |
| CDGT 040101 FR/FL | as above | 12° | 0.1 | DX2, DX20, DX30, DX50 |
| CDGT 040102 FR/FL | as above | 12° | 0.2 | DX2, DX20, DX30, DX50 |
| CDGT 040104 FR/FL | as above | 12° | 0.4 | DX2, DX20, DX30, DX50 |
| CDGT 040101 FN | F = sharp edge, N = neutral | 20° | 0.1 | DX2, DX20, DX30, DX50, DX52, DS10, DS20 |
| CDGT 040102 FN | as above | 20° | 0.2 | DX2, DX20, DX30, DX50, DX52, DS10, DS20 |
| CDGT 040104 FN | as above | 20° | 0.4 | DX2, DX20, DX30, DX50, DX52, DS10, DS20 |
| CDGW 040100 FN | W = without chip breaker, N = neutral | - | 0.0 | DX2, DX20, DX30, DX50 |
| CDGW 040101 FN | as above | - | 0.1 | DX2, DX20, DX30, DX50 |
| CDGW 040102 FN | as above | - | 0.2 | DX2, DX20, DX30, DX50 |
| CDGW 040104 FN | as above | - | 0.4 | DX2, DX20, DX30, DX50 |

The full order code adds the grade, e.g. `CDGT 040102 FN DX30` or `CDGT 040101 FL DX20`.

Insert dimensions (all types):

| Dimension | Value |
| --- | --- |
| l, cutting edge length | 4.03 mm (.159") |
| d, inscribed circle | 3.97 mm (.156") ±0.025 mm |
| s, thickness | 1.0 mm (.039") ±0.025 mm |
| d1, hole diameter | 2.2 mm (.087") |
| m (corner dimension, depends on R) | 1.103 / 1.048 / 0.992 / 0.881 mm at R 0 / 0.1 / 0.2 / 0.4 mm, ±0.025 mm |

Grades, briefly (details at https://www.denitool.com/md/en/insert-grades.md):

- DX2 is uncoated micrograin carbide.
- DX20, DX30 and DX50 are PVD-coated carbide.
- DX52 is PVD-coated carbide with an added PLC anti-friction film.
- DS10 and DS20 are for hard turning of hardened steel up to 62 HRC.

### Insert recommendation by ISO material group (from the page's selection chart)

| ISO group | Standard choice | Options |
| --- | --- | --- |
| P steel | CDGT 04010R FN DX20 | CDGT 04010R FN DX50, CDGT 04010R FL/FR DX50 |
| M stainless steel | CDGT 04010R FN DX30 | CDGT 04010R FL/FR DX30 |
| K cast iron | CDGW 04010R FN DX50 | CDGT 04010R FL/FR DX50 |
| N non-ferrous metals, plastics, composites | CDGT 04010R FN DX20 | CDGT 04010R FN DX2 |
| S heat-resistant alloys (iron-, nickel-, cobalt-based), titanium | CDGT 04010R FN DX30 | none shown |
| H hardened steel (< 62 HRC) | none shown in the chart | The catalog lists CDGT 0401.. FN in DS10 and DS20 for hard turning. |

"R" in `04010R` stands for the corner radius digit: 0, 1, 2 or 4, i.e. 0 to 0.4 mm.

## Cutting data (starting values from the Denitool catalog)

Feed f is in mm/rev (ipr in brackets). Cutting speed vc is in m/min (sfm in brackets), taken from the metric and U.S. catalog sheets. The feed depends on the stability of the tool and the workpiece. An empty cell means the catalog gives no value.

| # | Material group | Examples (W.-Nr.) | Rm N/mm² | HB | f CDGT FR/FL | f CDGT FN | f CDGW FN | vc DX2 | vc DX20 | vc DX30 / DX50 / DX52 |
| --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
| 1 | Low carbon steel | 1.0035, 1.0038, 1.0401, 1.0050 | < 500 | < 160 | 0.01-0.10 (.0004-.0039) | 0.01-0.10 (.0004-.0039) | 0.01-0.15 (.0004-.0059) | 160 (525) | 230 (760) | 280 (925) |
| 2 | Alloy steel (heat-treatable, case-hardening) | 1.0501, 1.1141, 1.5732, 1.7225 | 500-700 | 140-200 | 0.01-0.10 (.0004-.0039) | 0.01-0.10 (.0004-.0039) | 0.01-0.15 (.0004-.0059) | 140 (460) | 210 (690) | 260 (860) |
| 3 | Tool steel | 1.1221, 1.3505, 1.7225, 1.5141 | 900-1100 | 170-275 | | | 0.01-0.10 (.0004-.0039) | 130 (430) | 180 (590) | 250 (825) |
| 4 | Alloy tool steel, cast steel | 1.1191, 1.7225, 1.2080, 1.7220 | 700-900 | 250-325 | | | 0.01-0.10 (.0004-.0039) | | 180 (600) | 250 (825) |
| 5 | High-alloy cast steel | 1.6582, 1.8159, 1.2367, 1.7361 | 800-1000 / 1100-1500 | 250-390 / 325-450 | | | 0.01-0.07 (.0004-.0028) | | 160 (525) | 220 (725) |
| 6 | Stainless steel | 1.4006, 1.4057, 1.4034, 1.4005 | < 800 | < 250 | 0.01-0.10 (.0004-.0039) | 0.01-0.10 (.0004-.0039) | 0.01-0.15 (.0004-.0059) | | 160 (525) | 220 (725) |
| 7 | Stainless steel, austenitic, martensitic | 1.4300, 1.4301, 1.4435, 1.4573 | 500-1100 | 200-325 | 0.01-0.06 (.0004-.0024) | 0.01-0.06 (.0004-.0024) | 0.01-0.10 (.0004-.0039) | | 110 (360) | 170 (560) |
| 8 | Grey cast iron | 0.6010, 0.6015, 0.6020 | < 250 | < 200 | | | 0.01-0.20 (.0004-.0079) | 90 (300) | 150 (495) | 200 (660) |
| 9 | Malleable and nodular cast iron | 0.6025, 0.8135, 0.8140, 0.7050 | 250-350 | 200-250 | | | 0.01-0.10 (.0004-.0039) | 70 (230) | 120 (400) | 180 (600) |
| 10 | Copper alloys | 2.0331, 2.0401, 2.1030, 2.0920 | 450-650 | 120-180 | 0.01-0.15 (.0004-.0059) | 0.01-0.15 (.0004-.0059) | 0.03-0.15 (.0012-.0059) | 200 (660) | > 300 (> 1000) | > 300 (> 1000) |
| 11 | Aluminium alloys | 3.2582.05, 3.3541.01, 3.2315, 3.0205 | 250-350 | 200-300 | 0.01-0.15 (.0004-.0059) | 0.01-0.15 (.0004-.0059) | | > 600 (> 1980) | > 1000 (> 3300) | > 1000 (> 3300) |

Observe general safety regulations and the directions of the machine manufacturer at all times.

## Accessories: reduction bushings for cylindrical bars

A reduction bushing holds a cylindrical MicroTurn D bar (⌀ 4, 5 or 6 mm) in a larger holder bore. The bushing has a collar. Its overall length is 40 mm (1.575"), and the collar is 4 mm long.

Metric (values in mm):

| Designation | Bore d (bar shank) | Outer ⌀ d2 | Collar ⌀ D | H |
| --- | --- | --- | --- | --- |
| D 1004 / D 1005 / D 1006 | 4 / 5 / 6 | 10 | 16 | 9.5 |
| D 1604 / D 1605 / D 1606 | 4 / 5 / 6 | 16 | 22 | 15.5 |
| D 2004 / D 2005 / D 2006 | 4 / 5 / 6 | 20 | 26 | 19.5 |

Inch (Denitool Inc. program):

| Designation | Bore d (bar shank) | Outer ⌀ d2 | Collar ⌀ D | H |
| --- | --- | --- | --- | --- |
| D 0604" / D 0605" / D 0606" | .157" / .197" / .236" (4/5/6 mm) | 3/8" | .630" | .355" |
| D 1004" / D 1005" / D 1006" | .157" / .197" / .236" (4/5/6 mm) | 5/8" | .866" | .605" |
| D 1204" / D 1205" / D 1206" | .157" / .197" / .236" (4/5/6 mm) | 3/4" | 1.024" | .730" |

## How to find and order

Search the public WooCommerce Store API. Metric program (Swiss shop):

```
curl -s "https://ch.denitool.com/wp-json/wc/store/v1/products?search=SCLD&per_page=100"
```

This returns the 54 MicroTurn D bars plus 9 SynTool shank tips (designations starting with `C0`, e.g. `C0416 SCLDR-04`, see https://www.denitool.com/md/en/syntool.md). Inch program (U.S. shop, Denitool Inc.):

```
curl -s "https://store.denitool.com/wp-json/wc/store/v1/products?search=SCLD&per_page=100"
```

Other working searches:
- a single bar: `search=E04F%20SCLDR-04`
- the inch stepped bars of one size: `search=0405H`
- inserts for this family: `search=CDGT%200401` or `search=CDGW`
- one insert in all grades: `search=CDGT%20040102%20FN`
- reduction bushings: `search=D%201004`

In the U.S. shop, the inch sign in product names comes back as an HTML entity (`&#8221;` or `&#8243;`), e.g. `E0405H&#8221; SCLDR-04`. The Swiss shop uses the character `”`. Each product JSON has a `permalink` to the shop page, with the live price and stock.

Human catalog documents linked from the page (PDF previews):
- MicroTurn D catalog pages, metric: https://drive.google.com/file/d/0B0FVd0DDs6fFN2dRbjNsOXdYLTg/preview
- MicroTurn D catalog pages, inch: https://drive.google.com/file/d/0B0FVd0DDs6fFbTE0cHgyXy04ZTg/preview
- Cutting data, metric: https://drive.google.com/file/d/0B0FVd0DDs6fFTDJiUDltNUhYQjA/preview
- Cutting data, U.S.: https://drive.google.com/file/d/0B0FVd0DDs6fFTEFMR29JQWJLdTg/preview
- Insert selection chart CD04: https://drive.google.com/file/d/0B0FVd0DDs6fFQldrOTUzbTZ4Rzg/preview

## Related pages

Directly related:
- Boring bar designation key: https://www.denitool.com/md/en/boring-bar-designation.md
- Insert designation key: https://www.denitool.com/md/en/insert-designation.md
- Insert grades: https://www.denitool.com/md/en/insert-grades.md
- Tightening torques for insert screws: https://www.denitool.com/md/en/tightening-torque.md
- MicroTurn A/S (monobloc, from ⌀ 2.8 mm): https://www.denitool.com/md/en/microturn-a-s.md
- SynTool (CD 0401 inserts on carbide shank tips for third-party holders): https://www.denitool.com/md/en/syntool.md
- MicroCopy D (copying boring bars, DCGT 04T0..): https://www.denitool.com/md/en/microcopy-d.md
- Turning overview: https://www.denitool.com/md/en/turning.md
- All products: https://www.denitool.com/md/en/products.md

Other turning families: https://www.denitool.com/md/en/minitools-80.md · https://www.denitool.com/md/en/hardturn-80.md · https://www.denitool.com/md/en/smallbars-75.md · https://www.denitool.com/md/en/microcopy-g.md · https://www.denitool.com/md/en/microcopy-35.md · https://www.denitool.com/md/en/minicopy-35.md · https://www.denitool.com/md/en/copy-35.md · https://www.denitool.com/md/en/swissline.md · https://www.denitool.com/md/en/turning-60.md · https://www.denitool.com/md/en/isotools.md · https://www.denitool.com/md/en/cut-off-inserts-code.md

Milling: https://www.denitool.com/md/en/indexable-milling.md · https://www.denitool.com/md/en/microcut-f.md · https://www.denitool.com/md/en/micromill.md · https://www.denitool.com/md/en/countersink-cutter.md · https://www.denitool.com/md/en/corner-and-face-milling-cutter.md · https://www.denitool.com/md/en/millingcutters.md · https://www.denitool.com/md/en/slot-milling-cutter.md

Holemaking: https://www.denitool.com/md/en/holemaking.md · https://www.denitool.com/md/en/vario-system.md · https://www.denitool.com/md/en/carbide-bars-for-precision-boring-heads.md

Tooling systems: https://www.denitool.com/md/en/tooling-systems.md · https://www.denitool.com/md/en/modulo-d-system.md · https://www.denitool.com/md/en/system-tools-for-live-tooling.md · https://www.denitool.com/md/en/live-tools-for-heimatec-u-tec.md · https://www.denitool.com/md/en/mt-tools-for-chiron-precision.md · https://www.denitool.com/md/en/mt-tools-for-willemin-macodel.md · https://www.denitool.com/md/en/mt-tools-for-hsk-t.md · https://www.denitool.com/md/en/mt-tools-for-psc40.md · https://www.denitool.com/md/en/multicut-system.md

Company and help: https://www.denitool.com/md/en/services.md · https://www.denitool.com/md/en/support.md · https://www.denitool.com/md/en/downloads.md · https://www.denitool.com/md/en/denitool-company.md