TPHT 16T308 FR DX30

cutting data

Indexable Insert

Order Code:

(Corresponding ANSI size: TPHT 32.52)

Tungsten Carbide – Substrate
FR – Geometry
DX30 – Grade

Turning

0.01 mm - 10 mm – ap
0.0004" - 0.3937" – DOC

Milling

0.01 mm - 10 mm – ap
0.0004" - 0.3937" – DOC

Turning - metric starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	0 m/min	0 m/min	0 mm	0 mm
P2 Alloy Steel	0 m/min	0 m/min	0 mm	0 mm
P3 Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P4 Alloy Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P5 Alloy Cast Steel	0 m/min	0 m/min	0 mm	0 mm
M1 Stainless Steel	170 m/min	140 m/min	0.12 mm	0.01 mm
M2 Stainless Steel - Austenitic, Martensitic	130 m/min	110 m/min	0.12 mm	0.01 mm
K1 Grey Cast Iron	0 m/min	0 m/min	0 mm	0 mm
K2 Cast Iron Malleable	0 m/min	0 m/min	0 mm	0 mm
N1 Copper Alloys	600 m/min	500 m/min	0.25 mm	0.01 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	2000 m/min	500 m/min	0.25 mm	0.01 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	500 m/min	250 m/min	0.25 mm	0.01 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	500 m/min	100 m/min	0.25 mm	0.01 mm
N5 Carbon, Graphite Composites, CFRP	80 m/min	30 m/min	0.25 mm	0.01 mm
S1 Iron-Based, Heat-Resistant Alloys	45 m/min	15 m/min	0.25 mm	0.01 mm
S2 Cobalt-Based, Heat-Resistant Alloys	35 m/min	10 m/min	0.12 mm	0.01 mm
S3 Nickel-Based, Heat-Resistant Alloys	35 m/min	10 m/min	0.12 mm	0.01 mm
S4 Titanium and Titanium-based Alloys	120 m/min	40 m/min	0.12 mm	0.01 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Turning - imperial starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	0 SFM	0 SFM	0 IPR	0 IPR
P2 Alloy Steel	0 SFM	0 SFM	0 IPR	0 IPR
P3 Tool Steel	0 SFM	0 SFM	0 IPR	0 IPR
P4 Alloy Tool Steel	0 SFM	0 SFM	0 IPR	0 IPR
P5 Alloy Cast Steel	0 SFM	0 SFM	0 IPR	0 IPR
M1 Stainless Steel	558 SFM	459 SFM	0.0047 IPR	0.0004 IPR
M2 Stainless Steel - Austenitic, Martensitic	427 SFM	361 SFM	0.0047 IPR	0.0004 IPR
K1 Grey Cast Iron	0 SFM	0 SFM	0 IPR	0 IPR
K2 Cast Iron Malleable	0 SFM	0 SFM	0 IPR	0 IPR
N1 Copper Alloys	1969 SFM	1640 SFM	0.0098 IPR	0.0004 IPR
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	6562 SFM	1640 SFM	0.0098 IPR	0.0004 IPR
N3 High-Silicon Aluminium Alloys , Si >12,2%	1640 SFM	820 SFM	0.0098 IPR	0.0004 IPR
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	1640 SFM	328 SFM	0.0098 IPR	0.0004 IPR
N5 Carbon, Graphite Composites, CFRP	262 SFM	98 SFM	0.0098 IPR	0.0004 IPR
S1 Iron-Based, Heat-Resistant Alloys	148 SFM	49 SFM	0.0098 IPR	0.0004 IPR
S2 Cobalt-Based, Heat-Resistant Alloys	115 SFM	33 SFM	0.0047 IPR	0.0004 IPR
S3 Nickel-Based, Heat-Resistant Alloys	115 SFM	33 SFM	0.0047 IPR	0.0004 IPR
S4 Titanium and Titanium-based Alloys	394 SFM	131 SFM	0.0047 IPR	0.0004 IPR
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPR	0 IPR
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPR	0 IPR

Milling - metric starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	0 m/min	0 m/min	0 mm	0 mm
P2 Alloy Steel	0 m/min	0 m/min	0 mm	0 mm
P3 Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P4 Alloy Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P5 Alloy Cast Steel	0 m/min	0 m/min	0 mm	0 mm
M1 Stainless Steel	0 m/min	0 m/min	0 mm	0 mm
M2 Stainless Steel - Austenitic, Martensitic	0 m/min	0 m/min	0 mm	0 mm
K1 Grey Cast Iron	0 m/min	0 m/min	0 mm	0 mm
K2 Cast Iron Malleable	0 m/min	0 m/min	0 mm	0 mm
N1 Copper Alloys	600 m/min	350 m/min	0.08 mm	0.02 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	2000 m/min	600 m/min	0.18 mm	0.02 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	600 m/min	250 m/min	0.16 mm	0.02 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	500 m/min	100 m/min	0.15 mm	0.02 mm
N5 Carbon, Graphite Composites, CFRP	80 m/min	30 m/min	0.1 mm	0.03 mm
S1 Iron-Based, Heat-Resistant Alloys	45 m/min	15 m/min	0.04 mm	0.02 mm
S2 Cobalt-Based, Heat-Resistant Alloys	35 m/min	10 m/min	0.04 mm	0.02 mm
S3 Nickel-Based, Heat-Resistant Alloys	35 m/min	10 m/min	0.04 mm	0.02 mm
S4 Titanium and Titanium-based Alloys	90 m/min	40 m/min	0.05 mm	0.02 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Milling - imperial starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	0 SFM	0 SFM	0 IPT	0 IPT
P2 Alloy Steel	0 SFM	0 SFM	0 IPT	0 IPT
P3 Tool Steel	0 SFM	0 SFM	0 IPT	0 IPT
P4 Alloy Tool Steel	0 SFM	0 SFM	0 IPT	0 IPT
P5 Alloy Cast Steel	0 SFM	0 SFM	0 IPT	0 IPT
M1 Stainless Steel	0 SFM	0 SFM	0 IPT	0 IPT
M2 Stainless Steel - Austenitic, Martensitic	0 SFM	0 SFM	0 IPT	0 IPT
K1 Grey Cast Iron	0 SFM	0 SFM	0 IPT	0 IPT
K2 Cast Iron Malleable	0 SFM	0 SFM	0 IPT	0 IPT
N1 Copper Alloys	1969 SFM	1148 SFM	0.0031 IPT	0.0008 IPT
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	6562 SFM	1969 SFM	0.0071 IPT	0.0008 IPT
N3 High-Silicon Aluminium Alloys , Si >12,2%	1969 SFM	820 SFM	0.0063 IPT	0.0008 IPT
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	1640 SFM	328 SFM	0.0059 IPT	0.0008 IPT
N5 Carbon, Graphite Composites, CFRP	262 SFM	98 SFM	0.0039 IPT	0.0012 IPT
S1 Iron-Based, Heat-Resistant Alloys	148 SFM	49 SFM	0.0016 IPT	0.0008 IPT
S2 Cobalt-Based, Heat-Resistant Alloys	115 SFM	33 SFM	0.0016 IPT	0.0008 IPT
S3 Nickel-Based, Heat-Resistant Alloys	115 SFM	33 SFM	0.0016 IPT	0.0008 IPT
S4 Titanium and Titanium-based Alloys	295 SFM	131 SFM	0.002 IPT	0.0008 IPT
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPT	0 IPT
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPT	0 IPT

Go back

All technology data are recommendations. Relevant know-how in the proper handling of cutting tools is not replaced by this platform. Feed rate and cutting depth must be chosen so that the chip section does not exceed a value that could damage the tool or machine and also pays enough attention to the stability of the tool and clamping.