NSXR 680800030

cutting data

Indexable Insert

Order Code:

(Corresponding ANSI size: )

Denalloy – Substrate
FN – Geometry
– Coating

Turning

0.01 mm - 0.25 mm – ap
0.0004" - 0.0098" – DOC

Milling

0 mm - 0 mm – ap
0" - 0" – DOC

Turning - metric starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	34 m/min	30 m/min	0.05 mm	0.01 mm
P2 Alloy Steel	30 m/min	26 m/min	0.05 mm	0.01 mm
P3 Tool Steel	26 m/min	21 m/min	0.05 mm	0.01 mm
P4 Alloy Tool Steel	21 m/min	17 m/min	0.05 mm	0.01 mm
P5 Alloy Cast Steel	17 m/min	13 m/min	0.05 mm	0.01 mm
M1 Stainless Steel	30 m/min	26 m/min	0.05 mm	0.01 mm
M2 Stainless Steel - Austenitic, Martensitic	26 m/min	24 m/min	0.05 mm	0.01 mm
K1 Grey Cast Iron	26 m/min	21 m/min	0.05 mm	0.01 mm
K2 Cast Iron Malleable	21 m/min	17 m/min	0.05 mm	0.01 mm
N1 Copper Alloys	136 m/min	68 m/min	0.12 mm	0.01 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	300 m/min	150 m/min	0.12 mm	0.01 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	150 m/min	50 m/min	0.12 mm	0.01 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	500 m/min	200 m/min	0.12 mm	0.01 mm
N5 Carbon, Graphite Composites, CFRP	30 m/min	15 m/min	0.12 mm	0.01 mm
S1 Iron-Based, Heat-Resistant Alloys	17 m/min	13 m/min	0.05 mm	0.01 mm
S2 Cobalt-Based, Heat-Resistant Alloys	10 m/min	9 m/min	0.05 mm	0.01 mm
S3 Nickel-Based, Heat-Resistant Alloys	9 m/min	9 m/min	0.05 mm	0.01 mm
S4 Titanium and Titanium-based Alloys	26 m/min	13 m/min	0.05 mm	0.01 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Turning - imperial starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	112 SFM	98 SFM	0.002 IPR	0.0004 IPR
P2 Alloy Steel	98 SFM	85 SFM	0.002 IPR	0.0004 IPR
P3 Tool Steel	85 SFM	69 SFM	0.002 IPR	0.0004 IPR
P4 Alloy Tool Steel	69 SFM	56 SFM	0.002 IPR	0.0004 IPR
P5 Alloy Cast Steel	56 SFM	43 SFM	0.002 IPR	0.0004 IPR
M1 Stainless Steel	98 SFM	85 SFM	0.002 IPR	0.0004 IPR
M2 Stainless Steel - Austenitic, Martensitic	85 SFM	79 SFM	0.002 IPR	0.0004 IPR
K1 Grey Cast Iron	85 SFM	69 SFM	0.002 IPR	0.0004 IPR
K2 Cast Iron Malleable	69 SFM	56 SFM	0.002 IPR	0.0004 IPR
N1 Copper Alloys	446 SFM	223 SFM	0.0047 IPR	0.0004 IPR
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	984 SFM	492 SFM	0.0047 IPR	0.0004 IPR
N3 High-Silicon Aluminium Alloys , Si >12,2%	492 SFM	164 SFM	0.0047 IPR	0.0004 IPR
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	1640 SFM	656 SFM	0.0047 IPR	0.0004 IPR
N5 Carbon, Graphite Composites, CFRP	98 SFM	49 SFM	0.0047 IPR	0.0004 IPR
S1 Iron-Based, Heat-Resistant Alloys	56 SFM	43 SFM	0.002 IPR	0.0004 IPR
S2 Cobalt-Based, Heat-Resistant Alloys	33 SFM	30 SFM	0.002 IPR	0.0004 IPR
S3 Nickel-Based, Heat-Resistant Alloys	30 SFM	30 SFM	0.002 IPR	0.0004 IPR
S4 Titanium and Titanium-based Alloys	85 SFM	43 SFM	0.002 IPR	0.0004 IPR
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPR	0 IPR
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPR	0 IPR

Milling - metric starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	0 m/min	0 m/min	0 mm	0 mm
P2 Alloy Steel	0 m/min	0 m/min	0 mm	0 mm
P3 Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P4 Alloy Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P5 Alloy Cast Steel	0 m/min	0 m/min	0 mm	0 mm
M1 Stainless Steel	0 m/min	0 m/min	0 mm	0 mm
M2 Stainless Steel - Austenitic, Martensitic	0 m/min	0 m/min	0 mm	0 mm
K1 Grey Cast Iron	0 m/min	0 m/min	0 mm	0 mm
K2 Cast Iron Malleable	0 m/min	0 m/min	0 mm	0 mm
N1 Copper Alloys	0 m/min	0 m/min	0 mm	0 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 m/min	0 m/min	0 mm	0 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 m/min	0 m/min	0 mm	0 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	0 m/min	0 m/min	0 mm	0 mm
N5 Carbon, Graphite Composites, CFRP	0 m/min	0 m/min	0 mm	0 mm
S1 Iron-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S2 Cobalt-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S3 Nickel-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S4 Titanium and Titanium-based Alloys	0 m/min	0 m/min	0 mm	0 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Milling - imperial starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	0 SFM	0 SFM	0 IPT	0 IPT
P2 Alloy Steel	0 SFM	0 SFM	0 IPT	0 IPT
P3 Tool Steel	0 SFM	0 SFM	0 IPT	0 IPT
P4 Alloy Tool Steel	0 SFM	0 SFM	0 IPT	0 IPT
P5 Alloy Cast Steel	0 SFM	0 SFM	0 IPT	0 IPT
M1 Stainless Steel	0 SFM	0 SFM	0 IPT	0 IPT
M2 Stainless Steel - Austenitic, Martensitic	0 SFM	0 SFM	0 IPT	0 IPT
K1 Grey Cast Iron	0 SFM	0 SFM	0 IPT	0 IPT
K2 Cast Iron Malleable	0 SFM	0 SFM	0 IPT	0 IPT
N1 Copper Alloys	0 SFM	0 SFM	0 IPT	0 IPT
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 SFM	0 SFM	0 IPT	0 IPT
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 SFM	0 SFM	0 IPT	0 IPT
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	0 SFM	0 SFM	0 IPT	0 IPT
N5 Carbon, Graphite Composites, CFRP	0 SFM	0 SFM	0 IPT	0 IPT
S1 Iron-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S2 Cobalt-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S3 Nickel-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S4 Titanium and Titanium-based Alloys	0 SFM	0 SFM	0 IPT	0 IPT
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPT	0 IPT
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPT	0 IPT

Go back

All technology data are recommendations. Relevant know-how in the proper handling of cutting tools is not replaced by this platform. Feed rate and cutting depth must be chosen so that the chip section does not exceed a value that could damage the tool or machine and also pays enough attention to the stability of the tool and clamping.