NFL 1 1 165 110 GE DX30

cutting data

Indexable Insert

Order Code:

(Corresponding ANSI size: )

Tungsten Carbide – Substrate
FL – Geometry
DX30 – Grade

Turning

0 mm - 0 mm – ap
0" - 0" – DOC

Milling

1.65 mm - 1.65 mm – ap
0.065" - 0.065" – DOC

Turning - metric starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	0 m/min	0 m/min	0 mm	0 mm
P2 Alloy Steel	0 m/min	0 m/min	0 mm	0 mm
P3 Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P4 Alloy Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P5 Alloy Cast Steel	0 m/min	0 m/min	0 mm	0 mm
M1 Stainless Steel	0 m/min	0 m/min	0 mm	0 mm
M2 Stainless Steel - Austenitic, Martensitic	0 m/min	0 m/min	0 mm	0 mm
K1 Grey Cast Iron	0 m/min	0 m/min	0 mm	0 mm
K2 Cast Iron Malleable	0 m/min	0 m/min	0 mm	0 mm
N1 Copper Alloys	0 m/min	0 m/min	0 mm	0 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 m/min	0 m/min	0 mm	0 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 m/min	0 m/min	0 mm	0 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	0 m/min	0 m/min	0 mm	0 mm
N5 Carbon, Graphite Composites, CFRP	0 m/min	0 m/min	0 mm	0 mm
S1 Iron-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S2 Cobalt-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S3 Nickel-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S4 Titanium and Titanium-based Alloys	0 m/min	0 m/min	0 mm	0 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Turning - imperial starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	0 SFM	0 SFM	0 IPR	0 IPR
P2 Alloy Steel	0 SFM	0 SFM	0 IPR	0 IPR
P3 Tool Steel	0 SFM	0 SFM	0 IPR	0 IPR
P4 Alloy Tool Steel	0 SFM	0 SFM	0 IPR	0 IPR
P5 Alloy Cast Steel	0 SFM	0 SFM	0 IPR	0 IPR
M1 Stainless Steel	0 SFM	0 SFM	0 IPR	0 IPR
M2 Stainless Steel - Austenitic, Martensitic	0 SFM	0 SFM	0 IPR	0 IPR
K1 Grey Cast Iron	0 SFM	0 SFM	0 IPR	0 IPR
K2 Cast Iron Malleable	0 SFM	0 SFM	0 IPR	0 IPR
N1 Copper Alloys	0 SFM	0 SFM	0 IPR	0 IPR
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 SFM	0 SFM	0 IPR	0 IPR
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 SFM	0 SFM	0 IPR	0 IPR
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	0 SFM	0 SFM	0 IPR	0 IPR
N5 Carbon, Graphite Composites, CFRP	0 SFM	0 SFM	0 IPR	0 IPR
S1 Iron-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPR	0 IPR
S2 Cobalt-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPR	0 IPR
S3 Nickel-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPR	0 IPR
S4 Titanium and Titanium-based Alloys	0 SFM	0 SFM	0 IPR	0 IPR
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPR	0 IPR
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPR	0 IPR

Milling - metric starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	0 m/min	0 m/min	0 mm	0 mm
P2 Alloy Steel	0 m/min	0 m/min	0 mm	0 mm
P3 Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P4 Alloy Tool Steel	0 m/min	0 m/min	0 mm	0 mm
P5 Alloy Cast Steel	0 m/min	0 m/min	0 mm	0 mm
M1 Stainless Steel	0 m/min	0 m/min	0 mm	0 mm
M2 Stainless Steel - Austenitic, Martensitic	0 m/min	0 m/min	0 mm	0 mm
K1 Grey Cast Iron	260 m/min	200 m/min	0.08 mm	0.02 mm
K2 Cast Iron Malleable	180 m/min	120 m/min	0.06 mm	0.02 mm
N1 Copper Alloys	600 m/min	350 m/min	0.09 mm	0.02 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 m/min	0 m/min	0 mm	0 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 m/min	0 m/min	0 mm	0 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	500 m/min	100 m/min	0.1 mm	0.02 mm
N5 Carbon, Graphite Composites, CFRP	80 m/min	30 m/min	0.07 mm	0.03 mm
S1 Iron-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S2 Cobalt-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S3 Nickel-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S4 Titanium and Titanium-based Alloys	0 m/min	0 m/min	0 mm	0 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Milling - imperial starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	0 SFM	0 SFM	0 IPT	0 IPT
P2 Alloy Steel	0 SFM	0 SFM	0 IPT	0 IPT
P3 Tool Steel	0 SFM	0 SFM	0 IPT	0 IPT
P4 Alloy Tool Steel	0 SFM	0 SFM	0 IPT	0 IPT
P5 Alloy Cast Steel	0 SFM	0 SFM	0 IPT	0 IPT
M1 Stainless Steel	0 SFM	0 SFM	0 IPT	0 IPT
M2 Stainless Steel - Austenitic, Martensitic	0 SFM	0 SFM	0 IPT	0 IPT
K1 Grey Cast Iron	853 SFM	656 SFM	0.0031 IPT	0.0008 IPT
K2 Cast Iron Malleable	591 SFM	394 SFM	0.0024 IPT	0.0008 IPT
N1 Copper Alloys	1969 SFM	1148 SFM	0.0035 IPT	0.0008 IPT
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 SFM	0 SFM	0 IPT	0 IPT
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 SFM	0 SFM	0 IPT	0 IPT
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	1640 SFM	328 SFM	0.0039 IPT	0.0008 IPT
N5 Carbon, Graphite Composites, CFRP	262 SFM	98 SFM	0.0028 IPT	0.0012 IPT
S1 Iron-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S2 Cobalt-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S3 Nickel-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S4 Titanium and Titanium-based Alloys	0 SFM	0 SFM	0 IPT	0 IPT
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPT	0 IPT
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPT	0 IPT

Go back

All technology data are recommendations. Relevant know-how in the proper handling of cutting tools is not replaced by this platform. Feed rate and cutting depth must be chosen so that the chip section does not exceed a value that could damage the tool or machine and also pays enough attention to the stability of the tool and clamping.