CPGT 05T102 FN DX50

cutting data

Indexable Insert

Order Code:

(Corresponding ANSI size: CPGT 1.81.20.5)

Tungsten Carbide – Substrate
FN – Geometry
DX50 – Grade

Turning

0.01 mm - 2.5 mm – ap
0.0004" - 0.0984" – DOC

Milling

0.01 mm - 4.5 mm – ap
0.0004" - 0.1772" – DOC

Turning - metric starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	380 m/min	260 m/min	0.25 mm	0.01 mm
P2 Alloy Steel	360 m/min	240 m/min	0.12 mm	0.01 mm
P3 Tool Steel	320 m/min	200 m/min	0.12 mm	0.01 mm
P4 Alloy Tool Steel	260 m/min	160 m/min	0.12 mm	0.01 mm
P5 Alloy Cast Steel	200 m/min	120 m/min	0.12 mm	0.01 mm
M1 Stainless Steel	0 m/min	0 m/min	0 mm	0 mm
M2 Stainless Steel - Austenitic, Martensitic	0 m/min	0 m/min	0 mm	0 mm
K1 Grey Cast Iron	280 m/min	230 m/min	0.25 mm	0.01 mm
K2 Cast Iron Malleable	250 m/min	200 m/min	0.25 mm	0.01 mm
N1 Copper Alloys	600 m/min	500 m/min	0.25 mm	0.01 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 m/min	0 m/min	0 mm	0 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 m/min	0 m/min	0 mm	0 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	500 m/min	100 m/min	0.12 mm	0.01 mm
N5 Carbon, Graphite Composites, CFRP	80 m/min	30 m/min	0.12 mm	0.01 mm
S1 Iron-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S2 Cobalt-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S3 Nickel-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S4 Titanium and Titanium-based Alloys	0 m/min	0 m/min	0 mm	0 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Turning - imperial starting values

Material	v_{c max}	v_{c min}	f_max	f_min
P1 Low Carbon Steel	1247 SFM	853 SFM	0.0098 IPR	0.0004 IPR
P2 Alloy Steel	1181 SFM	787 SFM	0.0047 IPR	0.0004 IPR
P3 Tool Steel	1050 SFM	656 SFM	0.0047 IPR	0.0004 IPR
P4 Alloy Tool Steel	853 SFM	525 SFM	0.0047 IPR	0.0004 IPR
P5 Alloy Cast Steel	656 SFM	394 SFM	0.0047 IPR	0.0004 IPR
M1 Stainless Steel	0 SFM	0 SFM	0 IPR	0 IPR
M2 Stainless Steel - Austenitic, Martensitic	0 SFM	0 SFM	0 IPR	0 IPR
K1 Grey Cast Iron	919 SFM	755 SFM	0.0098 IPR	0.0004 IPR
K2 Cast Iron Malleable	820 SFM	656 SFM	0.0098 IPR	0.0004 IPR
N1 Copper Alloys	1969 SFM	1640 SFM	0.0098 IPR	0.0004 IPR
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 SFM	0 SFM	0 IPR	0 IPR
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 SFM	0 SFM	0 IPR	0 IPR
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	1640 SFM	328 SFM	0.0047 IPR	0.0004 IPR
N5 Carbon, Graphite Composites, CFRP	262 SFM	98 SFM	0.0047 IPR	0.0004 IPR
S1 Iron-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPR	0 IPR
S2 Cobalt-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPR	0 IPR
S3 Nickel-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPR	0 IPR
S4 Titanium and Titanium-based Alloys	0 SFM	0 SFM	0 IPR	0 IPR
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPR	0 IPR
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPR	0 IPR

Milling - metric starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	310 m/min	240 m/min	0.08 mm	0.02 mm
P2 Alloy Steel	280 m/min	210 m/min	0.07 mm	0.02 mm
P3 Tool Steel	230 m/min	200 m/min	0.06 mm	0.02 mm
P4 Alloy Tool Steel	240 m/min	210 m/min	0.06 mm	0.02 mm
P5 Alloy Cast Steel	200 m/min	160 m/min	0.05 mm	0.02 mm
M1 Stainless Steel	0 m/min	0 m/min	0 mm	0 mm
M2 Stainless Steel - Austenitic, Martensitic	0 m/min	0 m/min	0 mm	0 mm
K1 Grey Cast Iron	260 m/min	200 m/min	0.08 mm	0.02 mm
K2 Cast Iron Malleable	180 m/min	120 m/min	0.07 mm	0.02 mm
N1 Copper Alloys	600 m/min	350 m/min	0.08 mm	0.02 mm
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 m/min	0 m/min	0 mm	0 mm
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 m/min	0 m/min	0 mm	0 mm
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	500 m/min	100 m/min	0.1 mm	0.02 mm
N5 Carbon, Graphite Composites, CFRP	80 m/min	30 m/min	0.08 mm	0.03 mm
S1 Iron-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S2 Cobalt-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S3 Nickel-Based, Heat-Resistant Alloys	0 m/min	0 m/min	0 mm	0 mm
S4 Titanium and Titanium-based Alloys	0 m/min	0 m/min	0 mm	0 mm
H1 Hardened Steel C0.2% - C0.8%	0 m/min	0 m/min	0 mm	0 mm
H2 Hardened Steel C0.8% - C2.1%	0 m/min	0 m/min	0 mm	0 mm

Milling - imperial starting values

Material	v_{c max}	v_{c min}	f_{z max}	f_{z min}
P1 Low Carbon Steel	1017 SFM	787 SFM	0.0031 IPT	0.0008 IPT
P2 Alloy Steel	919 SFM	689 SFM	0.0028 IPT	0.0008 IPT
P3 Tool Steel	755 SFM	656 SFM	0.0024 IPT	0.0008 IPT
P4 Alloy Tool Steel	787 SFM	689 SFM	0.0024 IPT	0.0008 IPT
P5 Alloy Cast Steel	656 SFM	525 SFM	0.002 IPT	0.0008 IPT
M1 Stainless Steel	0 SFM	0 SFM	0 IPT	0 IPT
M2 Stainless Steel - Austenitic, Martensitic	0 SFM	0 SFM	0 IPT	0 IPT
K1 Grey Cast Iron	853 SFM	656 SFM	0.0031 IPT	0.0008 IPT
K2 Cast Iron Malleable	591 SFM	394 SFM	0.0028 IPT	0.0008 IPT
N1 Copper Alloys	1969 SFM	1148 SFM	0.0031 IPT	0.0008 IPT
N2 Low-Silicon Aluminium Alloys and Magnesium Alloys, Si <12,2%	0 SFM	0 SFM	0 IPT	0 IPT
N3 High-Silicon Aluminium Alloys , Si >12,2%	0 SFM	0 SFM	0 IPT	0 IPT
N4 Nylon, Plastics, Rubbers, Phenolics, Resins, Fibreglass	1640 SFM	328 SFM	0.0039 IPT	0.0008 IPT
N5 Carbon, Graphite Composites, CFRP	262 SFM	98 SFM	0.0031 IPT	0.0012 IPT
S1 Iron-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S2 Cobalt-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S3 Nickel-Based, Heat-Resistant Alloys	0 SFM	0 SFM	0 IPT	0 IPT
S4 Titanium and Titanium-based Alloys	0 SFM	0 SFM	0 IPT	0 IPT
H1 Hardened Steel C0.2% - C0.8%	0 SFM	0 SFM	0 IPT	0 IPT
H2 Hardened Steel C0.8% - C2.1%	0 SFM	0 SFM	0 IPT	0 IPT

Go back

All technology data are recommendations. Relevant know-how in the proper handling of cutting tools is not replaced by this platform. Feed rate and cutting depth must be chosen so that the chip section does not exceed a value that could damage the tool or machine and also pays enough attention to the stability of the tool and clamping.